Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
81mm OD
14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.
This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters
5 in stock
£12.00
INC VAT
£10.00 EX VAT
Dimensions:
62mm OD
Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units
5 in stock
92204230 GU92204230 92 20 42 30
9220 4230 9220.4230 92.20.42.30
£14.40
INC VAT
£12.00 EX VAT
Dimensions:
M6 x 12mm thread
Threaded straight throttle cable adjuster for carb top with M6 thread
5 in stock
12937200 GU12937200 12 93 72 00
1293 7200 1293.7200 12.93.72.00
£4.20
INC VAT
£3.50 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
5 in stock
£8.20
INC VAT
£6.83 EX VAT
"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.
5 in stock
£22.00
(VAT exempt)
£22.00 EX VAT
Dimensions:
8mm body OD, 29mm overall
Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002
These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED
5 in stock
£3.40
INC VAT
£2.83 EX VAT
Dimensions:
M20 x 1.5 sump plug
As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use.
Replaces the existing sump drain plug
Consists of:
One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards
5 in stock
£32.50
INC VAT
£27.08 EX VAT
Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift
Features:
Fabric:
| Size | S | M | L | XL | XXL |
|---|---|---|---|---|---|
| Chest Size | 36/38" | 40/41" | 42/44" | 46/48" | 50/52" |
5 in stock
£55.00
INC VAT
£45.83 EX VAT
Dimensions:
4mm OD
Ball bearing for 5 speed gearboxes
5 in stock
92295702-z 92295702 GU92295702 92 29 57 02
9229 5702 9229.5702 92.29.57.02
£0.90
INC VAT
£0.75 EX VAT
Dimensions:
38mm ID
Gasket for distributor to crankcase interface
5 in stock
12715901 GU12715901 12 71 59 01
1271 5901 1271.5901 12.71.59.01
£1.50
INC VAT
£1.25 EX VAT
Secure online shopping 
